Sunny

+86-13318866359

SALES AND TECHNICAL SUPPORT

sunny@nfstagelight.com

Alisa

+86-18719249660

SALES MANAGER

alisa@nfstagelight.com

470W Mythos 470W Beam Spot Wash 3 in 1 moving head light

  • Model Number: NF-HL470BSW
POWER SUPPLIES 100/240V 50/60 Hz
LAMP SOURCE 470W discharge lamp
Type MSD Platinum 20R
Color Temperature 7,800 K
Life 1,500hrs
Luminoux flux 23,000 lm
Cap by faston TM 250 (6.35 mm)
OPTICS 160mm diam. front lens
Zoom ranging from 4° to 31° for fixed gobos sharp focusing
Zoom range from 6.7° to 50° for rotating gobos sharp focusing

This is a very good moving head similar with clay paky mythos here we called it terminator. terminator is a highly advanced form of hybrid light: first of all, it is an excellent 470 watt-lamp spotlight, which produces an outstanding large light beam, featuring a zoom that ranges from 4° to 50° (1: 12 ratio). 
light beam is sharp, with perfectly defined edges, from the first millimetres after the front lens right along its entire length. the zoom is optimized for focusing, which is separate from that of the fixed and rotating gobos. its movements are smooth, fast and very quiet. terminator also features a completely redesigned indexed visual effect disc, which may be superimposed on all the gobos, both in and out of focus. 
but terminator is also an extraordinary beam light, allowing you to switch to a minimum fixed beam angle of just 2.5°. a large, very dense, 170 mm-diameter light beam leaves the terminator's front lens and remains parallel for its entire length even at great distances. 
terminator is a very versatile tool, which is useful in any situation and therefore an excellent investment. 
 

Mythos is a highly advanced form of hybrid light: first of all, it is an excellent 470 watt-lamp spotlight, which produces an outstanding large light beam, featuring a zoom that ranges from 4° to 50° (1:12 ratio).

Light beam is sharp, with perfectly defined edges, from the first millimetres after the front lens right along its entire length. The zoom is optimized for focusing, which is separate from that of the fixed and rotating gobos. Its movements are smooth, fast and very quiet. Mythos also features a completely redesigned indexed visual effect disc, which may be superimposed on all the gobos, both in and out of focus.

But Mythos is also an extraordinary beam light, allowing you to switch to a minimum fixed beam angle of just 2.5°. A large, very dense, 160 mm-diameter light beam leaves the Mythos’s front lens and remains parallel for its entire length even at great distances.

Mythos is a very versatile tool, which is useful in any situation and therefore an excellent investment.

 

  • 470W discharge lamp (new version)
  • Large 160mm diameter front lens
  • Electronic focusing for a perfectly sharp light beam along its entire lenght
  • 4°- 50° electronic zoom (Spotlight mode)
  • 2.5° aperture and “pipe” effect (Beam mode)
  • CMY color mixing with gradually fading color wheels
  • 15 special color filters on three wheel
  • 2 CTO filters (3200 K and 2500 K) + 1 CTB filter
  • Wheel with 6 HQ dichroic rotating gobos
  • Wheel with 18+1 fixed metal gobos
  • 6 beam reducer filters on the gobo wheel
  • Advanced visual effect disc (animation disc)
  • 2 indexable rotating prisms (8-facet and linear 4-facet prism)
  • Frost filter for soft-edge projection
  • High precision dimmer and stop-strobe effect
  • Rapid and extensive pan and tilt movements
  • High performance electronics and firmware
  • Art-Net / RDM
  • Patented Italian Design

Mythos

470W Mythos 470W Beam Spot Wash 3 in 1 moving head light (3).jpg

470W Mythos 470W Beam Spot Wash 3 in 1 moving head light (4).jpg

470W Mythos 470W Beam Spot Wash 3 in 1 moving head light (5).jpg

470W Mythos 470W Beam Spot Wash 3 in 1 moving head light (6).jpg

470W Mythos 470W Beam Spot Wash 3 in 1 moving head light (7).jpg

470W Mythos 470W Beam Spot Wash 3 in 1 moving head light (19).jpg

POWER SUPPLIES

AC power input Neutrik PowerCON TRUE1 (IP65)
115/230V 50/60 Hz
Automatic power supply switching

INPUT POWER

700VA at 230V 50Hz

LIGHT SOURCE

470W discharge lamp
- Type: New MSD Platinum 20RB
- Life: 1,500hrs
- Luminoux flux: 23,000 lm
- Cap by faston Tyco 187 (4,8 mm)

OPTICS

160mm diam. front lens
Electronic focusing for a perfectly sharp light beam along its entire length
Zoom ranging from 4° to 31° for fixed gobos sharp focusing
Zoom range from 6.7° to 50° for rotating gobos sharp focusing
BEAM mode with 2.5° aperture and “pipe” effect

COLOR SYSTEM

CMY color system based on 3 gradually fading color wheels
15 color filters on three wheels
2 CTO filters (3,200K and 2,500K) + 1 CTB filter

EFFECTS SECTION

2 gobo wheels:
- wheel with 6 HQ dichroic, indexable and interchangeable rotating gobos (Ø 25.9mm).
- interchangeable and variable rotating wheel with 18+1 fixed metal gobos (including 6 beam reducers).
Selectable Gobo-Shake function
Advanced Visual Effect Disc (Animation disc)
2 indexable and interchangeable rotating prisms (8-facet and linear prism)
Frost unit to soften the beam edge
High precision 0-100% dimmer
Mechanical shutter and adjustable speed strobe effect

CONTROL AND PROGRAMMING

30/34 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Art-Net / RDM
Display: Graphic LCD backlit b/w Display
Pan/Tilt Resolution: 16 bit
Gobo Indexing Resolution: 16 bit
Focus Resolution: 16 bit
Dimmer Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 5 pole XLR input and output
Software upload through DMX input

BODY

Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
Device locking PAN and TILT mechanisms for transportation and maintenance.

MOVING BODY

Angle:
- PAN = 540° - TILT = 244°
Resolution:
- PAN = 2.11° - PAN FINE = 0.008°
- TILT = 0.960° - TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

ELECTRONICS

Long life self-charging buffer battery.
Pre-set macros.
Function reset from control unit
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
"AUTOTEST" function from menù
Electronic monitoring with status error
Cooling system monitoring
DMX level monitoring on all channels
Internal data transmission diagnostics
Firmware Upgrade with no power
Firmware upload from another fixture

SAFETY DEVICES

Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating or failed operation of cooling system.
Forced ventilation with axial fans.

WORKING POSITION

Working in any position
Hanging system: with fast-lock omega clamps (1/4 turn) on the base

CE MARKING

In conformity with the European Directives:
• 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD)
• 2014/30/EU - Electromagnetic Compatibility (EMC)
• 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS)
• 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP)

WEIGHT

32 kg (70.54 lbs)

NewFeel Stage Laser Company View                                                 

Guangzhou NewFeel Photoelectric Technology Co., Ltd. established in 2008, has a 300 square meters manufacturing plant in Guangzhou.We are professional in researching and manufacturing Laser Lights.

The main Brand of our company is NF Laser Light, under this brand we have :

1.ANIMATION LASER LIGHT, Applicable in : night club, disco, club, concert, Gymnasium,etc.

2.OUTDOOR LASER LANDMARK, Applicable in: outdoor landmark, laser show, advertisingetc.

3.Beam Laser Bar Light Series

With the support from our experienced and professional R&D Dept., advanced and high-tech manufacturing & testing equipment and enthusiastic sales team, our products enjoy a good reputation both in home and over sea market for their superior performance. They are mainly exported to Europe, America, Asia and other developing countries.

Our company have mastered the nicety production & manufacturing technique, strictly control and manage the product quality, product’s performance and the product testing. We devoted our best service and support to our customer for getting the win-win and long term relationship.

Sincerely we believe that: Integrity is the basic of everything!

 

NewFeel Stage Laser Company Advantage                        

1:You will get the best price ,as we are a Factory Company

2:You will enjoy our 2 year warranty,which means that you do not worry the quality,if have any problem,we will replace or amend all our goods for free!
3:Support 3D effect design and programmed which will allow you to make your own 3d show !
4:You could enjoy your own logo in the laser body,do your own brand!
5:If your country is cold,You can reply on our service of Heating Equipment,when the temperature below-2°,it will be heater and speed up to start working for the light
6:you will work with a laser for refreshing,neat(dust proof) and the machine working sound just like a butterfly fly
7:You could used our laser in any country as Our voltage is 100-240v and have all kinds of country plug
8:You will like in our factory to see the produce testing and packing process,as we will update video and picture when producing testing and packing

Delivery Details & Returns:                                                           

All of our shipments are packaged handled with care. Our shipping department is open 6 days a week for 12 hours a day. This listing may include an extended handling time. We will notify you immediately if the actual handling time exceeds the listed handling time. Every order may need 1-3 bussiness days of packing and handling. Delivery: Delivery schedules are based upon normal conditions. All items in stock are available for shipping within 48 hours after order is received and confirmed. If item is out of stock or back-ordered, please allow a maximum of 3-7 days to manufacture.

1.Items are dispatched from  China Warehouse within 72 hours (except weekends and holidays)

2. Please check the shipping cost and the handing fee before purchasing.

3. Return items must be the problem of product itself, not Wrong manipulation by user.

4. Buyer is responsible for all return shipping charges.

Feedback:                                                                                     

We will automatically leave positive feedback to every buyer who completed payment. Please email us if you have problem with the items. We will try our best to solve the issue. Your satisfaction is our first priority. We appreciate your positive feedback. 

 

INQUIRY

vcode

CONTACT US

contact-email
contact-logo

Guangzhou New Feel Lighting and Audio Equipment Co., Ltd.

We are always providing our customers with reliable products and considerate services.

vcode

If you would like to keep touch with us directly, please go to contact us

  • Home

    Home

  • Tel

    Tel

  • Email

    Email

  • Contact

    Contact

  • Home

    Home

  • Tel

    Tel

  • Email

    Email

  • Contact

    Contact