NF560 10w 30kpps Ilda Laser Lights Show Stage Projector Light Fixtures
Model Number:NF560
RGB Laser 10w 30KPPS
Spot Diameter 6.5mm
Intelligent Temperature Control System
Request a Quote
New Feel Lighting
NF560 10w 30kpps Ilda Laser Lights
watch viedo
1-Year Warranty
We use MEAN WELL standard models for the power supply system, which provides a 1-year warranty. You can quickly find standard, easy-to-replace power modules wherever you are.
Application
NF560 laser light show projectors technologies are suitable for large and medium-sized indoor venues.The lamp can also be used indoors and outdoors to laser light show projectors graphics, logos, text, and laser billboard advertisements.
NF560 10W 30KPPS RGB DJ equipment laser light show projectors.
With better spot quality, the spot diameter measured at a distance of 50 meters is only about 30% farther than conventional lasers, so the range and intensity are greatly increased.
Control
Support for all major lighting and DMX consoles as well. The laser can be controlled from a PC over a network (CAT5 cable). Or it can be controlled directly from a console, using DMX or ArtNET.
The NF560 series all use NewFeel diode lasers.
Under the input drive signal of 0-5V, the laser drive circuit can provide a switching frequency of up to 100kHz. If each color of RGB has a modulation speed of 100kHz, you can theoretically obtain a color output of 360,000 colors. The almost uniform divergence angle and spot size of various colors enable delicate color synthesis even at long distances. With a spot diameter 6.5mm and a very small divergence angle, you can get a higher brightness laser beam than traditional lasers at longer distances. At the same time, it increases its own visual distance, which is impossible to achieve by increasing the power of traditional laser technology.
INTELLIGENT TEMPERATURE CONTROL SYSTEM
We specially designed a set of intelligent temperature control systems for NF560, it can work under the ambient temperature of minus 20 degrees to plus 40 degrees and has independent over-temperature protection, you no longer need to worry about the delicate laser being damaged due to overheating. All fans are controlled by MCU for linear speed regulation. If the temperature inside the lamp is within the normal range, the fans will gradually reduce the speed. This enables him to run with lower noise on very demanding occasions, such as studios, concerts, and other occasions with harsher noise requirements. It sounds simple, but this is not a simple temperature control system. We spent two years testing the operating conditions of various lasers at different temperatures to obtain specific setting parameters. We can say that these setup modes are close to the ideal working condition of the laser light show projectors.
Specifications
Download Catalogue
Power supply
AC110/220V, 50-60Hz±10%
Rated power
max 300W
Laser power
RGB10W
Laser modulated signal
analog or TTL modulation
Type of laser
imported semiconductor solid-state laser
Beam diameter at the aperture
<6mm
Beam divergence
<1.3mrad
Laser wavelength
red 638±5nm, green 520±5nm, blue 450±5nm
Scanning system
20K-25KPPS high speed scanning
Control mode
international standard ILDA control /DMX512 signal control /self-walk/voice control/master-slave
Control interface
international ILDA DB25 interface, international DXM512 , can connect with American pangolin laser software and tiger, pearl, MA controller,etc.
Control interface
international ILDA DB25 interface, international DXM512 , can connect with American pangolin laser software and tiger, pearl, MA controller,etc.
Safety function
one beam protection, no signal to close the light, etc
Frequently Asked Question
Q: What material is the NF560 laser club product case?
Q: Would Newfeel NF560 Dmx lasers work for an outdoor party?
Q: If I am unhappy with the NF560 ilda laser, What can I do about it?
Q: Can I use the Dmx controller to make NF560 Christmas laser light show laser display 3d patterns?
Q: Does the NF560 laser beam light have an SD card slot to insert ilda files? Does the device also come with an SD card to change the mode on the computer?
Newfeel animation laser effect
If you want to see more effects of this stage laser light, please check our YouTube video channel, or contact us directly.
